Insights from a new method providing single-shot, planar measurement of gas-phase temperature in particle-laden flows under high-flux radiation

Abstract

Two-colour laser-induced fluorescence (LIF) of toluene has been demonstrated to provide in situ, spatially resolved, planar measurements of the gas-phase temperature in a particle-laden flow with strong radiative heating at fluxes up to 42.8 MW/m². Toluene was seeded in trace quantities into the gas flow laden with particles of mean diameter 173 μm at a volumetric loading sufficiently high for particle–fluid and particle–particle interactions to be significant. The particle number density was also measured simultaneously using Mie scattering. The two-colour LIF method was found to resolve temperature with a pixelto- pixel standard deviation of 17.8 °C for unheated measurements in this system despite significant attenuation of the probe laser and signal trapping of the fluorescence emissions from the densely loaded particles. Following heating of the particles using high flux radiation, the increase in the gas-phase temperature from convection was found to be spatially non-uniform with highly localised regions of temperature spanning from ambient to 150 °C. This gas-phase heating continued well downstream from the limits of the region with radiative heating, with the time-averaged gas temperature increasing with distance at up to 2,200 °C/m on the jet centreline. The temperature of the flow was non-symmetrical in the direction of the heating beam, because the particles attenuate the radiation through absorption and scattering. The addition of radiation at fluxes up to 42.8 MW/m² did not significantly change the particle number density distribution within the region investigated here.